and enable Transmit MIDI Clock Sync (on/off)
to make JUMP transmit start, stop, continue and clock
commands to all open* MIDI ports. This allows any connected MIDI
software and/or hardware to automatically start, stop and keep
tempo with JUMP.| MIDI
Clock Sync Contents > Basic Controls > Command Buttons > MIDI Clock Sync |
Click on the Options button and enable Transmit MIDI Clock Sync (on/off)
to make JUMP transmit start, stop, continue and clock
commands to all open* MIDI ports. This allows any connected MIDI
software and/or hardware to automatically start, stop and keep
tempo with JUMP.
You will also need to configure the connected software and/or hardware to receive MIDI Clock Synchronisation.
The Sync Loop (On/Off) option determines whether connected MIDI software and/or hardware restarts when JUMP loops.
Also see the F5 keyboard shortcut.
* A MIDI port is opened only when there are note events ready for it, so if you just want to start/stop and sync the tempo of a MIDI device such as another sequencer, you may need to use a "dummy note" to force the port to open.
Next topic: Contents > Basic Controls > Tempo
A Guide to Using JUMP - Copyright © 2003 - 2008 Hard Note Software Ltd